Solution to Tutorial 4 Given: F = 1000 kg-mole/hr, XF = 0.

20 (ethanol MVC) Feed is saturated liquid, thus q = 1. 0 XD = 0. 80, XB = 0.

02 (maximum); R = 5/3 First, plot the equilibrium curve using the VLE data given. Note that you need to convert mole% ethanol into mole fraction. Then, apply the McCabe-Thiele method to find the number of theoretical (equilibrium) trays required for the separation. Step 1: Since R and XD are known (5/3, and 0. 80 respectively), plot the ROL equation – it passes through XD on the 450 diagonal, i.

e. the point (0. 80, 0. 80). The intercept is 0. / (5/3+1) = 0. 30.

### Best services for writing your paper according to Trustpilot

Premium Partner
From \$18.00 per page
4,8 / 5
4,80
Writers Experience
4,80
Delivery
4,90
Support
4,70
Price
Recommended Service
From \$13.90 per page
4,6 / 5
4,70
Writers Experience
4,70
Delivery
4,60
Support
4,60
Price
From \$20.00 per page
4,5 / 5
4,80
Writers Experience
4,50
Delivery
4,40
Support
4,10
Price
* All Partners were chosen among 50+ writing services by our Customer Satisfaction Team

step 2: Plot the feed line using the q-line equation with q = 1. 0 and xF = 0. 20 – it passes through xF on the 450 diagonal. In this case, with q = 1. 0, the q-line is a vertical line at xF = 0. 20. Then locate its intersection with ROL.

Step 3: Plot the SOL, by Joining the point XB = 0. 02 on the 450 diagonal to the intersection point between the ROL and q-line. Step 4: Draw triangles starting from XD (between ROL and equilibrium curve) down to XB (between SOL and equilibrium curve).

The change from ROL to SOL occurs when xF is reached. [ Back on Top ]From the graph plotted, number of triangles = 15. Thus, number of equilibrium stages required = 14+ 1 reboiler. Optimum feed plate location = stage #13. The distillate and bottoms flowrates (D and B) can be obtained using material balances: Total: F=D+B; thus, IOOO-D MVC: = + substituting for B gives: ( 1000) ( 0. 20) = ( D) ( 0. 80) + ( 1000- D) ( 0.

02 ) solving gives: D = 230. 77 kg-mole/hr And B = 769. 23 kg-mole/hr [ Back on Top ] Analysis of Design: It is noted that the Rectifying Section has more trays (12) than the Stripping Section (3, including the feed tray but excluding the reboiler).

This is because the relative volatility of ethanol decreases sharply with increase in ethanol concentration. separation in the Stripping Section. As concentration of ethanol (mole fraction) increases, the relative volatility drops quickly, and becomes smaller as the concentration moves toward azeotropic concentration (at 0. 894 mole fraction ethanol).

The distance between the ROL and equilibrium curve becomes smaller, signifying a drop in concentration driving force for mass transfer, resulting in more trays being required in the Rectifying Section. [ Back on Top ]